MSDS

Page 5/11
Safety Data Sheet
according to 1907/2006/EC (REACH), 1272/2008/EC (CLP), and
GHS
Printing date 29.09.2014 Revision: 29.09.2014
Trade name: RockSolid Fast Patch Part B
(Contd. of page 4)
39.4.1
·
Information about storage in one common storage facility:
Store away from foodstuffs.
Do not store together with oxidising and acidic materials.
·
Further information about storage conditions:
Store in cool, dry conditions in well sealed receptacles.
·
7.3 Specific end use(s)
No further relevant information available.
SECTION 8: Exposure controls/personal protection
·
Additional information about design of technical facilities:
No further data; see item 7.
·
8.1 Control parameters
·
Ingredients with limit values that require monitoring at the workplace:
14807-96-6 Talc
PEL (USA) Long-term value: 20 mppcf ppm
(containing <1% Quartz)
REL (USA) Long-term value: 2* mg/m³
*respirable dust
TLV (USA) Long-term value: 2* mg/m³
*as respirable fraction; E
EL (Canada) Long-term value: 2 mg/m³
respirable
EV (Canada) Long-term value: 2* mg/m³, 2 f/cc ppm
*respirable
100-51-6 Benzyl alcohol
WEEL (USA) Long-term value: 10 ppm
·
DNELs
No further relevant information available.
·
PNECs
No further relevant information available.
·
Additional information:
The lists valid during the making were used as basis.
·
8.2 Exposure controls
·
Personal protective equipment:
·
General protective and hygienic measures:
The usual precautionary measures are to be adhered to when handling chemicals.
Wash hands before breaks and at the end of work.
Keep away from foodstuffs, beverages and feed.
Avoid contact with the eyes and skin.
Do not inhale gases / fumes / aerosols.
·
Respiratory protection:
Not required under normal conditions of use.
Use suitable respiratory protective device when aerosol or mist is formed.
For spills, respiratory protection may be advisable.
·
Protection of hands:
Protective gloves
(Contd. on page 6)