MSDS

Page 5/12
Safety Data Sheet
according to 1907/2006/EC (REACH), 1272/2008/EC (CLP), and
OSHA GHS
Printing date 01.10.2014 Revision: 01.10.2014
Trade name: RockSolid Fast Patch Part A
(Contd. of page 4)
39.4.1
See Section 13 for disposal information.
SECTION 7: Handling and storage
·
7.1 Precautions for safe handling
Prevent formation of aerosols.
Avoid splashes or spray in enclosed areas.
Use only in well ventilated areas.
·
Information about fire - and explosion protection:
No special measures required.
·
7.2 Conditions for safe storage, including any incompatibilities
·
Storage:
·
Requirements to be met by storerooms and receptacles:
Avoid storage near extreme heat, ignition sources or open flame.
Protect from humidity and water.
·
Information about storage in one common storage facility:
Store away from foodstuffs.
Do not store together with oxidising and acidic materials.
·
Further information about storage conditions:
Store in cool, dry conditions in well sealed receptacles.
·
7.3 Specific end use(s)
No further relevant information available.
SECTION 8: Exposure controls/personal protection
·
Additional information about design of technical facilities:
No further data; see item 7.
·
8.1 Control parameters
·
Ingredients with limit values that require monitoring at the workplace:
14807-96-6 Talc
PEL (USA) Long-term value: 20 mppcf ppm
(containing <1% Quartz)
REL (USA) Long-term value: 2* mg/m³
*respirable dust
TLV (USA) Long-term value: 2* mg/m³
*as respirable fraction; E
EL (Canada) Long-term value: 2 mg/m³
respirable
EV (Canada) Long-term value: 2* mg/m³, 2 f/cc ppm
*respirable
100-51-6 Benzyl alcohol
WEEL (USA) Long-term value: 10 ppm
·
DNELs
No further relevant information available.
·
PNECs
No further relevant information available.
·
Additional information:
The lists valid during the making were used as basis.
(Contd. on page 6)