MSDS

Page 5/10
Safety Data Sheet
according to 1907/2006/EC (REACH), 1272/2008/EC (CLP), and
OSHA GHS
Printing date 29.09.2014 Revision: 29.09.2014
Trade name: Fortifying Sealer
(Contd. of page 4)
39.4.1
·
8.1 Control parameters
·
Ingredients with limit values that require monitoring at the workplace:
The product does not contain any relevant quantities of materials with critical values that have to be
monitored at the workplace.
·
DNELs
No further relevant information available.
·
PNECs
No further relevant information available.
·
Additional info rmation:
The lists valid during the making were used as basis.
·
8.2 Exposure controls
·
Personal prot ective equipm e nt:
·
General protective and hygienic meas ures:
The usual precautionary measures are to be adhered to when handling chemicals.
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing.
Wash hands before breaks and at the end of work.
Avoid contact with the eyes and skin.
Do not eat or drink while working.
Do not inhale gases / fumes / aerosols.
·
Respiratory protection:
Not required under normal conditions of use.
Use suitable respiratory protective device when aerosol or mist is formed.
For spills, respiratory protection may be advisable.
·
Protection of hands:
Protective gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the
degradation.
·
M aterial of gloves
Nitrile rubber, NBR
The selection of the suitable gloves does not only depend on the material, but also on further marks of
quality and varies from manufacturer to manufacturer. As the product is a preparation of several
substances, the resistance of the glove material can not be calculated in advance and has therefore to be
checked prior to the application.
·
Penetration time of glove material
The exact break through time has to be found out by the manufacturer of the protective gloves and has to
be observed.
·
Eye protection:
Contact lenses should not be worn.
Safety glasses
·
Body protecti on:
Protective work clothing
·
Limitation and supervision of exposure into the environment
No further relevant information available.
(Contd. on page 6)