Instructions / Assembly

ITEMS
• (2) Wood Sawhorses
• Large Piece of Plywood (For the Tabletop)
• Varathane 3X Wood Stain
• Varathane Triple Thick Polyurethane
• Chalkboard Brush-On
• Sandpaper (#120, #150, & #180 Grits)
• Tack Cloth
• Drop Cloth
• Drill & Screws (Optional)
• Stir Sticks
• Lint-Free Cloth
• Synthetic Bristle Paint Brush
1.PREPARE: Always work in a well-ventilated area and use a drop cloth to protect from drips, spills, and splatter. Sand
each sawhorse thoroughly, working your way up through #120, #150, and #180 grit sandpaper. Wipe away the sanding
dust with a tack cloth after nishing with each grit.
2.STAIN: Stir or shake your Varathane 3X Wood Stain thoroughly. Working in manageable sections, use a lint-free
cloth or brush to apply a generous amount of stain onto the rst sawhorse. Let the stain sit on the surface for a few
minutes, and then wipe away the excess with a clean cloth in the direction of the wood grain. Repeat this step on the
second sawhorse, then set them aside to dry for at least one hour.
3.POLYURETHANE: Once the sawhorses are dry, stir (do not shake) your can of Varathane Triple Thick Polyurethane.
Use a brush to apply an even coat of poly to both sawhorses. Be sure to apply the polyurethane in the direction of the
wood grain and in one thick, uniform coat. Set the sawhorses aside to dry completely for 48 hours.
4.PAINT: Stir the Chalkboard Brush-On paint thoroughly with a stir stick. Then, use a foam roller to apply the paint to
the plywood. Avoid excessive rolling and use light, even strokes for an even and smooth nish. Wait 2-4 hours, and then
apply a second coat. Repeat once more, so you have three solid coats of paint on the table.
Tip: Prop the tabletop up on two buckets to make it easier to paint.
5.CONDITION: Let the chalkboard paint cure completely for three days. Then, rub the side of a piece of chalk over the
entire surface and erase with a chalkboard eraser or dry cloth. This will condition the surface so it’s ready for use.
6.FINISH: Now that the sawhorses and tabletop are completely dry, simply slide the tabletop on top of the sawhorse to
complete the table. If you want to secure the table-top, use a drill and screws to attach it to the sawhorses.
MAKE THIS CHEAP CHALKBOARD
PARTY TABLE FROM SCRATCH
This large chalkboard table is the perfect way to display treats at your next party!
When hosting a party, there’s never enough table space for all the food and drinks. Heres a cheap chalk-
board-top table that you can make in a few steps so you’ll never have to stress over table space again.
Plus, when the partys over, you can break it down for easy storage.
Visit www.homedepot.com/rustoleum
for other great ideas, products and inspiration.
As shown Specialty
Chalkboard Brush-On Paint in Black,
Varathane Triple Thick Polyurethane in
Satin & 3X Wood Stain in Worn Navy

Summary of content (6 pages)