Specification

TECHNICAL DATA CHD-01
CHALKED
ULTRA MATTE PAINT
Form: GDH-772
Rev.: 042415
1
.DESCRIPTION AND USES .
Rust-Oleum
®
Chalked Ultra Matte Paint is formulated as an ultra
matte finish with excellent coverage and adhesion on furniture
and home décor. Chalked Ultra Matte paint provides one coat
coverage on most surfaces without special surface preparation
or priming. It can be painted or distressed. It is suitable for use on
wood, metal, ceramic, glass, canvas and more. For interior use
only.
.PRODUCTS .
SKU Description
285139 Serenity Blue
285140 Linen White
285141 Country Gray
285142 Blush Pink
285143 Aged Gray
285144 Charcoal
.PAINTING CONDITIONS .
Use in a well ventilated area such as an open garage.
Apply when temperature is between 50 and 90°F (10-
32°C) and humidity is below 85% to ensure proper drying.
..PRODUCT APPLICATION .
SURFACE PREPARATION
Remove all dirt, grease, oil, salt and chemical
contaminants by washing the surface with soap and water
and let dry. Remove loose paint and rust with a wire brush
or sandpaper. Lightly sand glossy surfaces. Remove any
wax by lightly wiping the surface with mineral spirits.
WARNING: If you scrape, sand, or remove old paint, you may
release lead dust. LEAD IS TOXIC. EXPOSURE TO LEAD
DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN
DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN
SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved
respirator to control lead exposure. Clean up carefully with a
HEPA vacuum and a wet mop. Before you start, find out how to
protect yourself and your family by contacting the National Lead
Information Hotline at 1-800-424-LEAD or log on to
www.eps.gov/lead.
..PRODUCT APPLICATION (cont.) .
PRIMING
Priming is not required for most surfaces. For excellent
coverage, use of a Rust-Oleum primer can be used on
surfaces such as bare wood and treated wood. The finish
coat can be applied 2 hours after applying the primer.
Recommended primers include:
Painter’s Touch 1908502 Flat Gray
Painter’s Touch 224430T Flat White
APPLICATION
Apply only when air and surface temperatures are
between 50-90°F (10-32°C) and humidity is below 85% to
ensure proper drying. Stir thoroughly to ensure any settled
pigment is re-dispersed. Do not shake the can. Thinning is
not required. In hot, dry conditions, thin with up to 2
ounces of fresh water per quart to extend the dry time.
Avoid painting in direct sunlight or on hot surfaces.
Use a high quality synthetic brush. Roller application is not
recommended. Avoid excessive brushing as this will
reduce film thickness and protection. Use light even brush
strokes to ensure even flow and the smoothest finish.
DRY & RECOAT
Dry and recoat times are based on 70°F (21°C) and 50%
relative humidity. Allow more time at cooler temperatures.
Dries to the touch in 30 minutes, to handle in 1 hour and
can be recoated after 2-4 hours. The finish coat is fully dry
in 2-4 hours. Rust-Oleum Chalked Clear Protective
Topcoat can be applied for added protection. Apply
according to the label instructions.
DISTRESSING
This paint can be distressed if desired. To distress the
surface, lightly sand the surface with fine to medium grit
sandpaper or a sanding sponge. Wait 2 hours before
sanding or distressing.
CLEAN-UP
Clean brush and other and application tools with soap and
water.