Instructions / Assembly

ITEMS
• Barstool
• Stops Rust Satin
• Stops Rust Metallic
Painter’s Tape
• Masking Paper
• Drop Cloth
1. PREPARE: Always work in a well-ventilated area and use a drop cloth to protect from overspray.
2. PAINT: Shake your can of Stops Rust Metallic for one minute after the mixing ball starts to
rattle. Then, hold the can 10-16” from the barstool and spray in a steady, sweeping motion over the
top of the seat and the bottoms of the legs of the stool. Apply one light coat followed by a second
moderate coat. Let the paint dry completely for 24 hours.
Once the paint is completely dry, use painters tape and masking paper to mask o the seat and
bottoms of the legs of the barstool. Then, shake your can of Stops Rust Satin thoroughly and apply
2-3 light coats to the middle section of the barstool.
3. FINISH: Once youre nished painting, remove the painter’s tape and set the barstool aside to
dry for 24 hours.
INDUSTRIAL GARAGE BARSTOOL
A few coats of spray paint gave this barstool a sleek, industrial look.
This industrial barstool is great for the garage, workshop, or man cave. Heres how you
can get this two-tone look in three steps.
Visit www.homedepot.com/rustoleum
for other great ideas, products and inspiration.
As shown Stops Rust
Satin Spray Paint in Classic Navy &
Metallic Spray Paint in Silver Metallic

Summary of content (4 pages)