Use and Care Manual

TECHNICAL DATA SRT-09
STOPS RUST
TEXTURED SPRAYS
Form: CS2166
Rev.: 030113
1
.DESCRIPTION AND USES .
Rust-Oleum
®
Stops Rust
®
Textured Sprays are designed to
provide a durable protective coating with excellent resistance to
rust, and excellent resistance to abrasion, fading, chipping, and
dulling. These sprays apply easily, provide excellent coverage
and dry fast to a tough attractive finish. Rust-Oleum
®
Stops
Rust
®
Textured Sprays are ideal for outdoor metal surfaces.
These sprays feature a comfort tip with a wider finger pad to
reduce fatigue caused by continuous spraying and an any-angle
tip which allow s you to spray at any angle. Not for use on
galvanized metal.
.PRODUCTS (12 ounce sprays) .
MULTICOLOR TEXTURE
223523 Autumn Brown
223524 Desert Bisque
223525 Aged Iron
223526 Deep Forest
239119 Sea Green
239120 Radiant Brass
239121 Caribbean Sand
239122 Rustic Umber
TEXTURED METALLIC
251053 Silver
252303 Galaxy
252304 Moonlit Copper
262658 Excalibur
262660 Mystic Brown
TEXTURED
7220830 Black
7221830 Dark Pewter
7222830 Forest Green
7223830 Sandstone
7224830 Nickel
7225830 White
7226830 Bronze
7227830 Rust
7228830 Sage
241253 Dark Olive
241254 Dark Taupe
241255 Dark Brown
241256 Old Brick
..PAINTING CONDITIONS .
Use outdoors or in a well ventilated area such as an open
garage. Apply when temperature is between 50-90°F (10-
32°C) and humidity is below 65% to ensure proper drying.
Do not apply to surfaces, when heated, exceed 200°F
(93°C). Do not apply to galvanized steel. Avoid spraying in
very windy and dusty conditions. Cover surrounding area
to protect from spray mist.
..PRODUCT APPLICATION .
SURFACE PREPARATION
Remove all dirt, grease, oil, salt and chemical
contaminants by washing the surface with a commercial
detergent, or other suitable cleaning method. Rinse with
fresh water and allow to thoroughly dry. Remove loose
paint and rust with a wire brush or sandpaper. Previously
coated surfaces must be sound and in good condition.
Smooth, hard, or glossy finishes should be scarified by
sanding to create a surface profile. WARNING! If you
scrape, sand or remove old paint from any surface, you
may release lead paint dust. LEAD IS TOXIC.
EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS
ILLNESS, SUCH AS BRAIN DAMAGE; ESPECIALLY IN
CHILDREN. PREGNANT WOMEN SHOULD ALSO
AVOID EXPOSURE. Wear a NIOSH approved respirator
to control lead exposure. Clean up carefully with a HEPA
vacuum and a wet mop. Before you start, find out how to
protect yourself and your family by contacting the National
Lead Information Hotline at 1-800-424-LEAD or log on to
www.epa.gov/lead.
PRIMING
Use of a Rust-Oleum
®
primer provides added corrosion
protection, excellent adhesion and hiding and is especially
recommended for bare wood and metal. The following
primers are recommended.
7769 Rusty Metal Primer
7780 Clean Metal Primer

Summary of content (3 pages)