Use and Care Manual

TECHNICAL DATA RLS-01
LEAKSEAL
TM
SELF-FUSING SILICONE TAPE
Form: GDH-126
Rev.: 072613
1
.DESCRIPTION AND USES .
Rust-Oleum
®
LeakSeal
™
Tape is a self-fusing, silicone
repair tape that conforms to any surface while providing a
water-tight seal. LeakSeal Tap creates a chemical a
moisture resistant barrier that fixes leaky pipes, hoses and
insulates frayed electrical wires. It is easy to remove,
leaves no sticky residue and protects from corrosion.
.PRODUCTS .
SKU Description
275795 LeakSeal Silicone Tape Black
275796 LeakSeal Silicone Tape Opaque
..PRODUCT APPLICATION .
INSTRUCTIONS
Step 1 – Dry the substrate before applying the tape. Place
the tape on the problem area, hold firmly and stretch (with
tension) around the object.
Step 2 – Continue to stretch the tape, overlapping each
layer by ½” and wrap over itself to fuse.
Step 3 – Wrap completely over the problem area and cut
the tape once finished. Press the end firmly into place. To
remove, carefully cut with scissors or knife.
..PERFORMANCE PROPERTIES .
Moisture Resistance Excellent
Electrical Insulation Excellent
Resilience Excellent
High Temperatures Excellent
Flame Resistance Good
Abrasion Resistance Good
Tear Resistance Good
UV Resistance Excellent
Ozone Resistance Excellent
Corrosion Prevention Excellent
Solvent Resistance Good
Acid Resistance Good – Fair
Oil Resistance Good – Fair
Hydrocarbon Resistance Good - Fair
COMPLIANCE TO INDUSTRY STANDARDS
A-A-59163: This supersedes MIL-I-46852C
CPSIA: Consumer Product Safety Improvement Act
PROP 65: The Safe Drinking Water and Toxic Enforcement
Act of 1986
Class H Insulator – National Electrical Manufacturers
Association (NEMA
REACH: Registration, Evaluation, Authorization and
Restriction of Chemicals (EU Regulation) Flammability
Testing: Per CPSC’s ASTM F963-08