Instructions / Assembly

APPLICATION TIPS
Q. HOW DOES HUMIDITY AND TEMPERATURE AFFECT THE COATING
APPLICATION PROCESS?
A. Higher humidity will cause the Adhesive Base Coat to dry more slowly. This
increases the time window for applying and adhering the Decorative Chips
onto the wet Adhesive Base Coat. Ideal conditions are 50% relative humidity
and temperature at or around 70ºF. Do NOT apply the Adhesive Base Coat at
relative humidity levels below 30% or above 70% and when the dew point is
under 5ºF.
TIP: If humidity is low, use a humidifier to increase moisture levels in the room.
Q. HOW DO I DISPOSE OF UNUSED PRODUCT AND SOILED RAGS OR
BRUSHES?
A. Cover any unused, unmixed products tightly for storage. Any mixed
Protective Top Coat material will harden and cannot be reused. Cover
mixed Protective Top Coat securely, allow to harden in the container, and
discard according to local regulations. Adhesive Base Coat tools can be
cleaned with water.
(continued)