Instructions / Assembly

IMPORTANT: Once the Adhesive Base Coat is applied, you have a
20-minute window to apply the Decorative Color Chips before the Adhesive Base
Coat dries. Prior to applying the Adhesive Base Coat, prepare the Decorative
Chip Dispenser included in the kit by filling it ¾ full with Decorative Chips. Set
the Decorative Chip Dispenser to setting #2 on the handle. Only use color chips
designed for countertops. IT IS RECOMMENDED TO WORK IN A TEAM OF
TWO AND HAVE ONE PERSON WORK WITH A BRUSH WHILE THE OTHER
WORKS WITH A ROLLER.
A. Thoroughly stir the Adhesive Base Coat using a stir stick. Pour a portion of
the Adhesive Base Coat into a clean paint tray.
B. You must work quickly to maintain a
wet edge on the entire surface. Starting
with the backsplash, use a 2” synthetic
brush to apply an even, heavy coat of
Adhesive Base Coat.
C. Be sure that your coverage includes
1”- 2” of the flat countertop surface
that connects to the backsplash. This
will prevent your roller from accidentally
bumping into the backsplash while
rolling.
D. Working from back-to-front, use a 6 inch
long 3/8” nap microfiber roller to liberally
apply a heavy, even coat of Adhesive Base Coat
over the entire countertop. Then use the brush again to coat any tight
spaces (i.e. around the sink). A HEAVY, EVEN COAT OF ADHESIVE BASE
COAT WILL ENSURE MAXIMUM ADHESION OF DECORATIVE CHIPS. THE
APPLICATION CAN BE COMPARED TO “FROSTING A CAKE.”
Roller
Brush