Use and Care Manual

ManualsBrandsRust-Oleum Transformations ManualsAppliance, Tub & Tile Paint46 oz. White Interior Tile Finish Kit

TECHNICAL DATA TIL-01

TILE TRANSFORMATIONS

KIT

Form: GDH-513

Rev.: 102014

.DESCRIPTION AND USES .

Tile Transformations

™

is the simple process that enables you to

easily transform outdated tile into a beautiful and extremely

durable finish. Tile Transformations is ideal for wall tile in showers,

wall tile surrounding a tub, kitchen backsplashes, and ceramic tile

countertops.

The kit includes:

• Cleaner 265873

• Textured Bond Coat Part A Activator 268058

• Textured Bond Coat Part B Base 268070

• Natural Stone Finish Part A Activator 268563

• Natural Stone Finish Part B Base 268565

• ¼” Nap roller

• ⅜” Nap roller

• Scrub pads

• Stir Sticks

• Instruction sheet

Items not supplied with the kit which need to be purchased

separately:

• 2” foam brush

• (2) 2” Synthetic paint brushes

• 4” Roller frame

• (2) 4” Paint trays

• 2” Painter’s tape

• Lint-free cloths/rags

• Caulk (for repair)

• Protective glasses

• Drop Cloth

• Disposable Gloves

PACKAGING .

The kit covers 50 square feet.

..PRODUCTS .

Kit Number Description

268546 White

..PRODUCT APPLICATION .

SURFACE PREPARATION

To ensure proper adhesion, the tile surface must be

thoroughly cleaned before applying Tile Transformations.

Repair chips and cracks with a patching compound similar

to Liquid Steel

. Remove any mildew with a solution of

bleach and water and rinse thoroughly. Sprinkle the

cleaner on a wet scrub pad (included) and let stand for 15

seconds. Scrub the surface to remove all dirt, grease, oil,

soap film and hard water deposits. Thoroughly rinse the

entire surface, making sure all residue has been removed.

..PRODUCT APPLICATION (cont.) .

SURFACE PREPARATION (cont.)

Soap scum is often not visible to the eye. To ensure all

soap scum has been removed, run hand along surface of

the tile. If a rough, dull, or tacky surface exists, additional

cleaning is necessary. Repeat cleaning until the tile feels

clean and has a smooth surface. To aid in cleaning,

household cleaners (i.e. Comet

or LimeAway

) can be

used.

Remove all caulk around tub surrounds, counters, ledges,

mirrors, showerheads, etc. Plug the drain so no caulk

residue falls in and remove all caulk from the surface.

Rubbing alcohol also works well for cleaning soap scum

and caulk residue.

Inspect the grout between the tiles for any cracks, chips or

holes. Repair grout first by re-grouting severely damaged

areas or filling in with a 2-part epoxy putty before moving

on to the next step. Follow the manufacturer’s instructions

and allow for proper dry time before applying Tile

Transformations. Use 2” painter’s tape to mask off the

edges of the tile that meets the wall and other immovable

fixtures.

APPLICATION

APPLICATION OF THE TEXTURED BOND COAT

IMPORTANT: Contents of the solvent based Textured

Bond Coat are flammable until dry. Extinguish all flames

and pilot lights, and turn off stoves, heaters, electric

motors and other sources of ignition during use until

project is complete. Keep away from heat, sparks and

flame. Do not use bathroom ventilation fan. Do not smoke.

Apply when air (ambient) and surface temperature is 60-

85°F (16-29°C) and the relative humidity is below 85%.

Apply the Textured Bond Coat within 90 minutes of mixing

Part A Activator with Part B Base.

Cover tub or shower area with drop cloths. Wearing

disposable gloves and safety glasses, pour all of Part A

Activator into the Part B Base and thoroughly mix with a

stir stick for a minimum of 2 minutes. Pour one-fourth of

the mixture into a clean paint tray and cover remaining

product. To maximize working time, do not pour the entire

product into the tray. Work in manageable areas when

rolling the Textured Bond Coat. Working with a partner,

have the first person apply the Textured Bond Coat using

a 2” synthetic brush to the outside edges including

corners. Be careful not to work too far ahead of the partner

rolling.

Summary of content (3 pages)

PAGE 1
TECHNICAL DATA TIL-01 TILE TRANSFORMATIONSTM KIT .DESCRIPTION AND USES . ..PRODUCT APPLICATION (cont.) ™ SURFACE PREPARATION (cont.) Tile Transformations is the simple process that enables you to easily transform outdated tile into a beautiful and extremely durable finish. Tile Transformations is ideal for wall tile in showers, wall tile surrounding a tub, kitchen backsplashes, and ceramic tile countertops. Soap scum is often not visible to the eye.
PAGE 2
TECHNICAL DATA TILE TRANSFORMATIONSTM KIT PRODUCT APPLICATION (cont.) PRODUCT APPLICATION (cont.) IMPORTANT: It is important to apply the Textured Bond Coat with the included ¼” nap roller. The ¼” nap roller is the thinner roller cover with a shorter/more compact nap. With the other partner following behind, roll the Textured Bond Coat onto the entire surface using the included ¼” nap roller. Apply enough Textured Bond Coat to coat the existing tile, but not too heavy, avoiding drips, runs or sags.
PAGE 3
TECHNICAL DATA TILE TRANSFORMATIONSTM KIT . PHYSICAL PROPERTIES . Textured Bond Coat Natural Stone Finish Epoxy Amine Epoxy Amine Titanium Dioxide None DPNB, Acetone, Xylene DPNB, Acetone, Xylene Per Gallon 11.0 lbs. 9.0 lbs. Per Liter 1.32 kg 1.08 kg By Weight 87.3% 86.3% By Volume 79.6% 82.4% <100g/l (0.83 lbs./gal.) <100 g/l (0.83 lbs./gal.) Recommended Dry Film Thickness (DFT) per Coat 3.0-5.0 mils (75-125µ) 2.0-3.