Instructions / Assembly

APPLICATION TIPS
Q. HOW DO I REFINISH AROUND STOVES, DISHWASHERS, AND OTHER APPLIANCES?
A. Mask stoves, dishwashers, and other appliances with smooth painter’s tape.
Be diligent about pressing in the edge to ensure none of the coating will bleed
through. Place drop cloths over countertop surfaces and floors.
Q. HOW CAN I AVOID POTENTIAL APPEARANCE PROBLEMS?
A. Apply the Bond Coat and Protective Top Coat in even coats brushing with the grain of
the wood. Be sure to avoid drips. If drips occur, brush over while wet or clean up with
water when dry. Use a premium-quality paint brush throughout the application
process for a smooth finish.
Q. WHERE CAN I LEARN MORE ABOUT ADDITIONAL GLAZING TECHNIQUES?
A. The traditional glazing technique is used in the Instructional Pamphlet directions. For
additional glazing techniques visit RustoleumTransformations.com
Q. I’VE APPLIED THE DECORATIVE GLAZE, BUT DO NOT LIKE THE WAY
IT LOOKS- WHAT CAN I DO?
A. The Decorative Glaze stays wet 3-5 minutes. While wet, simply use Decorative
Glazing Cloth to remove glaze from surface. If the Decorative Glaze has dried, use a
clean, damp cloth to remove glaze from surface. Note: If applying over open grain
cabinetry, such as Oak, you may not be able to remove all Decorative Glaze from the
surface. If this is the case, you will need to apply another coat of Bond Coat followed
by the Protective Top Coat.
Q. DO I HAVE TO USE THE DECORATIVE GLAZE?
A. Using the Decorative Glaze is optional and does not add additional performance
benefits to the system. If you do not wish to use the Decorative Glaze, simply skip
“STEP #3” in the application process.
continued