Use and Care Manual

TECHNICAL DATA
UNIVERSAL METALLIC SPRAYS
Rust-Oleum Corporation Form: GDH-142
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 032515
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
PHYSICAL PROPERTIES .
UNIVERSAL METALLIC SPRAYS
Resin Type
Modified Alkyd
Pigment Type
Varies with Color
Solvents
Acetone, Ketone blend
MIR
1.9 Max
Fill Weight
11 ounces
Recommended Dry Film Thickness
(DFT) per Coat
1.0-2.0 mils
(25-50µ)
Practical Coverage at Recommended
DFT (assumes 15% material loss)
10-15 sq. ft./can
(0.9- 1.4 m
2
/can)
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
Touch
30 minutes
Handle
1 hour
Recoat
Within 1 hour or after 48 hours
Dry Heat Resistance
200ºF (94ºC)
Shelf Life
5 years
Flash Point
-156ºF (-104ºC)
Safety Information
For additional information, see MSDS.
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements of this
literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use of our materials are beyond our
control, we can guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective
materials. All technical information is subject to change without notice.