User Guide

TECHNICAL DATA
AUTOMOTIVE RUST REFORMER SPRAY
Rust-Oleum Corporation Form: GDH-608
11 Hawthorn Parkway Phone: [phone] Rev.: 052517
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
Physical Properties
RUST RFORMER
Resin Type
Oil modified Alkyd
Appearance
Opaque liquid
Solvents
Acetone, Mineral Spirits, N-Butyl Acetate, Xylene
MIR
0.8 Max
Fill Weight
10.25 ounces
Recommended Dry Film
Thickness (DFT) Per Coat
1.5-2.5 mils
(37.5-62.5µ)
Practical Coverage at Recommended
DFT (assumes 15% material loss)
8-10 sq.ft./can
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
Tack-free
20-40 minutes
Handle
1 hour
Recoat
After 24 hours
Shelf Life
5 years
Flash Point
-156°F (-104°C)
Safety Information
For additional information, see SDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.