How to Guide

TECHNICAL DATA
CABINET TRANSFORMATIONS
™
Rust-Oleum Corporation Form: GDH-770
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 052115
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
. PHYSICAL PROPERTIES .
DEGLOSSER
BOND COAT
TOP COAT
Resin Type
None
Acrylic / Urethane
Acrylic / Urethane
Pigment Type
None
Titanium Dioxide, Inerts
Titanium dioxide, Inerts
Solvents
Water
Water
Water
Weight
Per Gallon
8.40 lbs.
9.80-11.90 lbs.
8.47 lbs.
Per Liter
—
—
—
Solids
By Weight
4.8%
40-58%
29%
By Volume
4.5%
30-42%
27%
Volatile Organic Compounds
<465 g/l (3.85 lbs./gal.)
<85 g/l (0.70 lbs./gal.)
<272 g/l (2.3 lbs./gal.)
Recommended Dry Film
Thickness (DFT) Per Coat
NA
2.0-2.5 mils
(50-62.5µ)
4.0-8.0 mils
(100-200µ)
Wet Film to Achieve DFT
(unthinned material)
—
6.6-7.5 mils
(165-187.5µ)
14.8-30.0 mils
(370-750µ)
Practical Coverage at Recommended DFT
(assumes 15% material loss)
—
160-200 sq.ft./gal.
(3.9-4.7 m
2
/l)
46-92 sq.ft./gal.
(1.1-2.3 m
2
/l)
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
Dry to Recoat
1 hour
2-3 hours
NA
Full Cure
NA
NA
24 hours
Dry Heat Resistance
NA
200°F (93°C)
200°F (93°C)
Shelf Life
NA
3 years
3 years
Storage
Store in a dry area between 40-100°F (4.5-38°C)
Flash Point
220°F (105°C)
215°F (102°C)
215°F (102°C)
Safety Information
Warning!
COMBUSTIBLE LIQUID AND VAPOR. HARMFUL IF INHALED. MAY AFFECT
BRAIN OR NERVOUS SYSTEM CAUSING DIZZINESS, HEADACHE OR NAUSEA.
CAUSES RESPIRATORY TRACT, EYE AND SKIN IRRITATION. FOR INDUSTRIAL
OR COMMERCIAL USE ONLY. KEEP OUT OF REACH OF CHILDREN.
SEE THE PRODUCT MATERIAL SAFETY DATA SHEET (MSDS)
AND LABEL WARNINGS FOR ADDITIONAL SAFETY INFORMATION.
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.