Use and Care Manual

TECHNICAL DATA

FARM & IMPLEMENT ENAMELS

Form: GDH-959

Rev.: 091817

. PRODUCT APPLICATION (cont.) .

EQUIPMENT RECOMMENDATIONS

BRUSH: Use a good quality natural or polyester bristle

brush.

ROLLER: Use a good quality natural or polyester cover.

Use a short nap (¼”) roller for smooth surfaces, and a

medium nap (⅜”) roller for rough surfaces.

AIR-ATOMIZED SPRAY:

Method Fluid Tip Fluid Delivery Atomizing

Pressure

Pressure 0.055-0.070 16 oz./min. 25-60 psi

Siphon 0.055-0.070 — 25-60 psi

AIRLESS SPRAY:

Pump Ratio Fluid Pressure Fluid Tip Filter Mesh

30:1 1,600-2,400 psi 0.013-0.017 100

. PRODUCT APPLICATION (cont.) .

THINNING

BRUSH/ROLLER: Normally not required.

AIR-ATOMIZED SPRAY: Acetone: Use up to 15% by

volume.

AIRLESS SPRAY: Acetone: Normally not required. If

needed use up to 5% by volume.

DRY & RECOAT

Dry and recoat times are based on 70ºF (21°C) and 50%

relative humidity. Dries to the touch in 2-4 hours and can

be handled in 5-9 hours. Recoat within 1 hour or after 24

hours.

CLEAN-UP

Acetone or Mineral Spirits.