How to Guide

TECHNICAL DATA ROC-53
RAIN REPELLLENT
Form: GDH-990
Rev.: 120915
1
.DESCRIPTION AND USES .
Rust-Oleum
®
NeverWet
®
Rain Repellent is a long lasting,
hydrophobic glass treatment that improves visibility and
safety while driving in poor weather conditions. A crystal
clear, haze-free treatment is ideal for automotive and
residential glass. NeverWet Rain Repellent’s advanced
technology repels rain, mud and dirt up to two times longer
than other products.
. FEATURES .
Excellent longevity (2X longer lasting)
Repels rain, mud and dirt
Easy-to-apply
Haze-free formula
.PRODUCTS .
SKU Description
287337 NeverWet Rain Repellent
.SPRAYING CONDITIONS .
Use when temperatures are between 50°F (10°C) and
90°F (32°C). Avoid spraying in very windy and dusty
conditions. Cover surrounding area to protect from spray
mist.
.PRODUCT APPLICATION .
SURFACE PREPARATION
NeverWet Rain Repellent is to be used on glass surfaces
only. For best results, clean the glass with a glass cleaner
such as NeverWet Glass Cleaner to remove any
contaminants from the surface and let dry. Follow the
cleaner instructions for best results.
.PRODUCT APPLICATION (cont.) .
APPLICATION
SHAKE bottle well before use. Rotate nozzle to “ON”
position. Wearing gloves, spray NeverWet Rain Repellent
onto a clean cloth or paper towel and buff into the
windshield in a circular motion. Reapply the product to
your cloth as needed until the entire window has been
covered.
Once complete, let the treatment sit for 5 minutes. The
treatment will appear lightly hazed. Buff off using a clean,
dry cloth or paper towel in a circular motion. Apply a
second coat of Rain Repellent using the same technique.
Do not use near open flame.
ADDITIONAL INFORMATION
IMPORTANT! If a slight haze or shine remains after
removing the second coat, use a damp clean cloth or
paper towel to aide in the removal of any missed
treatment.
To fully remove rain repellent, use a soft scrub with cold
water and wipe the glass until the coating is gone.
DRY & RECOAT
Dry and recoat times are based on 70ºF and 50% relative
humidity. Allow the treatment to dry for 5 minutes and buff
off using a clean cloth or paper towel. The treatment will
be fully dry in 10 minutes.
CLEAN-UP
When finished spraying, wipe off nozzle before storing.
Properly discard empty container.

Summary of content (2 pages)