How to Guide

TECHNICAL DATA
TES-11
TESTORS
®
ALL PURPOSE
MATTE CRAFT PAINT
Rust-Oleum Corporation
11 Hawthorn Parkway
Vernon Hills, Illinois 60061
www.rustoleumla.com
Form: ARJ-1864
Rev.: 061119
PHYSICAL PROPERTIES
TESTORS MATTE CRAFT PAINT
Resin
Acrylic WB Emulsion
Pigment
Varies by color
Solids By Volume
20-30%
VOC
<120 g/l
Recommended
Dry Film Thickness (DFT) per Coat
1 mil
Wet Film to Achieve DFT
(unthinned material)
3.5-5 mils
Practical Coverage at Recommended
DFT (assumes 15% material loss)
4-6 sq.ft./per 2 oz. bottle
Dry Times at 77°F
(25°C) and 50%
Relative Humidity
Touch
30 minutes
Handle
1-2 hours
Recoat
3 hours
Full Cure
24 hours
Shelf Life
3 Years
Flash Point
>200°F (>93°C)
Safety Information
For additional information, see SDS
Calculated values are shown and may vary from the actual manufactured material.
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.