Manualshelf

How to Guide

ManualsBrandsRust-Oleum ManualsCraft & Art Supplies1-qt. Sterling Silver Glitter Paint (2-Pack)
12
TECHNICAL DATA
SPC-69
RUST-OLEUM
®
SPECIALTY
GLITTER INTERIOR WALL PAINT
1
DESCRIPTION AND USES
Rust-Oleum
®
Glitter Brush Paint is an intense glitter finish
that provides multi-dimensional shimmer and sparkle. Can
be applied to drywall, wood, metal, plastic and hardboard.
Formulated to provide a decorative glitter finish to most
surfaces.
PRODUCTS
SKU
DESCRIPTION (Quarts)
323858
Sterling Silver
323859
Harvest Gold
323860
Iridescent Clear
APPLICATION
READ ALL INSTRUCTIONS CAREFULLY BEFORE
STARTING PROJECT
SURFACE PREPARATION
Surface must be free of any dust, grease, oil, stains, rust, or
any other substances. Sand glossy surfaces before
painting, and remove any loose paint.
WARNING! If you scrape, sand or remove old paint from any
surface, you may release lead paint dust. LEAD IS TOXIC.
EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS
ILLNESS, SUCH AS BRAIN DAMAGE; ESPECIALLY IN
CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID
EXPOSURE. Wear a NIOSH approved respirator to control
lead exposure. Clean up carefully with a HEPA vacuum and
a wet mop. Before you start, find out how to protect yourself
and your family by contacting the National Lead Information
Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead.
PRIMING
Rust-Oleum Glitter Brush Paint can be used over a colored
or white primer. For best results, use a primer that is similar
in color to glitter paint. Use of a Rust-Oleum
®
latex primer
provides superior adhesion and hiding and is especially
recommended for bare wood and metal. Follow primer
manufacturer's instructions for topcoat time. After priming
bare wood, sand lightly to smooth out the surface.
APPLICATION (cont.)
APPLICATION
For interior use only. Do not apply paint on surfaces which
are exposed to high humidity. Use when temperature is
between 50°F (10°C) and 90°F (32°C) and humidity is below
85% to ensure proper drying.
PAINTING: Rust-Oleum Glitter Brush Paint can be applied
with a roller, brush or paint sprayer. With all application
methods, use uniform thin coats to build glitter film.
ROLL: Stir thoroughly. Use a 9’’ and ½’’ nap roller for best
results. Fully wet roller with paint and remove excess before
applying to wall. Roll in uniform direction or with slight W
pattern. Avoid excessive rolling.
BRUSH: Stir thoroughly. Use a good quality synthetic
brush. Brush in uniform direction per coat of paint. Apply
each coat of paint in a different direction, alternating each
coat for best results . For example: first coat vertical, second
coat horizontal and repeat. Alternating brushing directions
with successive coats greatly increases hide. Use light,
even strokes to ensure the smoothest finish.
SPRAY: Stir thoroughly. Mix well in spray gun before
application, do not shake. Use fan pattern for best results.
Approx 1-2 hours for recoat.
DRY AND RECOAT TIMES
Based on 77°F (25°C) 50% relative humidity. Allow more
time at cooler temperatures. Dries to the touch in 1 hour, to
handle in 2 hours and fully dry in 2-4 hours. May be
recoated after 4 hours..
COVERAGE
One quart will cover 35-50 sq. ft. Use light even coats to
build to desired glitter coverage.
CLEAN UP
Clean brush and other application tools immediately with
soap and water. Follow spray gun manufacturer's
instructions for cleaning equipment.

Summary of content (2 pages)