How to Guide

TECHNICAL DATA
SRT-01
STOPS RUST
®
ENAMEL SPRAYS
1
Form:
GDH-678
Rev.:
092118
DESCRIPTION AND USES
Rust-Oleum
®
Stops Rust
®
Enamel Sprays are designed to
provide a durable protective coating with excellent rust
prevention, and excellent resistance to abrasion, fading,
chipping, and dulling. These sprays apply easily, provide
excellent coverage and dry fast to a tough attractive finish.
Rust-Oleum Stops Rust Enamel Sprays are ideal for ferrous,
non-ferrous metal and wood surfaces. It features a comfort
tip with a wider finger pad to reduce fatigue caused by
continuous spraying and an any-angle tip which allows you
to spray at any angle. Not for use on galvanized metal.
PRODUCTS
SKU
DESCRIPTION (12 Ounce Aerosol)
7721830
Fresh Blue
7722830
Harbor Blue
7723830
Navy
7724830
Sail Blue
7727830
Royal Blue
7731830
Grass Green
7733830
Dark Hunter Green
7738830
Hunter Green
7747830
Sunburst Yellow
7754830
Anodized Bronze
7762830
Sunrise Red
7763830
Carnival Red
7765830
Regal Red
7768830
Burgundy
7770830
Almond
7771830
Sand
7775830
Leather Brown
7776830
Flat Black
7779830
Gloss Black
7783830
Pewter Gray
7784830
Charcoal Gray
7786830
Smoke Gray
7789830
Canvas White
7790830
Flat White
7792830
Gloss White
7794830
Antique White
7797830
Semi-Gloss White
7798830
Semi-Gloss Black
214804
Orange
214085
Flat Brown
214086
Charleston Green
214087
Army Green
241235
Pistachio
241236
Glacier Blue
PRODUCTS (cont.)
SKU
DESCRIPTION (12 Ounce Aerosol)
245897
Burnt Orange
248567
Merlot
248568
Cherry
248569
Emerald
248630
French Roast
248631
Night Tide
249032
Khaki
250702
Pure White
250703
Cobblestone
250704
Lobster Red
250705
Fern
262661
Dark Walnut
267112
Kona Brown
269292
Maui Blue
277239
Lagoon
284678
Gloss Light Turquoise
298537
Gloss Tuscan Sun
312816
Gloss Rich Jade
312817
Gloss Cambridge Stone
312818
Gloss Deep Slate
312821
Flat Red Rock
PRODUCT APPLICATION
Use outdoors or in a well-ventilated area such as an open
garage. Use when temperature is between 50°-90°F (10°-
32°C) and humidity is below 70% to ensure proper drying.
Do not apply to surfaces that, when heated, exceed 200°F
(93°C) or galvanized metal. Avoid spraying in very windy,
dusty conditions. Cover surrounding area to protect from
spray mist.
SURFACE PREPARATION
Remove all dirt, grease, oil, salt and chemical contaminants
by washing the surface with a commercial detergent, or
other suitable cleaning method. Rinse with fresh water and
allow to thoroughly dry. Remove loose paint and rust with a
wire brush or sandpaper. Previously coated surfaces must
be sound and in good condition. Smooth, hard, or glossy
finishes should be scarified by sanding to create a surface
profile.
WARNING! If you scrape, sand or remove old paint from any
surface, you may release lead paint dust. LEAD IS TOXIC.
EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS
ILLNESS, SUCH AS BRAIN DAMAGE; ESPECIALLY IN
CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID
EXPOSURE. Wear a NIOSH approved respirator to control
lead exposure. Clean up carefully with a HEPA vacuum and
a wet mop. Before you start, find out how to protect yourself
and your family by contacting the National Lead Information
Hotline at 1-800-424-LEAD or log on to
www.epa.gov/lead.