User Guide

TECHNICAL DATA
SPECIALTY TUB & TILE REFINISHING KIT
Rust-Oleum Corporation Form: GDH-335
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 031716
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
.PHYSICAL PROPERTIES .
TUB & TILE REFINISHING KIT
Resin Type
Epoxy Acrylic
Pigment Type
Titanium Dioxide
Solvents
Ethyl Benzene, Light Aromatic Naphtha, Propylene Glycol Monomethyl Ether,
1,2,4-Trimethylbenzene, 1,3,5-Trimethylbnezene, Xylene
Weight
Per Gallon
9.9 lbs.
Per Liter
1.19 kg
Solids
By Weight
54.6 %
By Volume
44.4 %
Volatile Organic Compounds
540 g/l (4.50 lbs./gal.)
Recommended Dry Film Thickness
(DFT) per Coat
1.5-2.0 mils
(37.5-50µ)
Wet Film to Achieve DFT (unthinned
material)
3.5-5.0 mils
(87.5-125µ)
Practical Coverage at Recommended
DFT (assumes 15% material loss)
2 coats covers 70-110 sq.ft./quart or
2 coats on a standard bathtub
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
Touch
1 hour
Recoat
1-2 hours
Full Cure
3 days
Dry Heat Resistance
NA
Shelf Life
3 years
Flash Point
78°F (26°C)
Safety Information
For additional information, see SDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.