Installation Guide

RUSTICA LOCK Assembly Instructions
25. Hook the top end of the
lock rail up into the top latch
assembly. e hook will rest
on the top of the lower rivet
(Figure 14A).
NOTE:
If the lock latch is not latching
over the stop, adjust the stop by
loosening the lag bolt and the four
adjustment screws on the door
stop, then sliding the stop up or
down. Re-tighten the lag bolt and
adjustment screws.
24. Ensure the lock mechanism
is in the locked position
(Figure 14A).
Figure 14A
Figure 14B
26. Fasten the rail to the lock
using two pan head phillips
screws (provided) Figure 14B.
3
03
2017
VERSION
RUSTICAHARDWARE.com
9