Installation Guide

RUSTICA LOCK Assembly Instructions
3
03
2017
VERSION
RUSTICAHARDWARE.com
6
Figure 5
3
1/2”
From Edge
Lock
Length
3/4”
LOCK INSTALLATION
PREPARATION
9. Beginning at the top of the
door, measure the lock length
(overall length). Make a mark
with a pencil on the door
(Figure 5).
10. Measure 3 1/2” in from the
edge of the door where the mark
is located. Make another mark
and call it ‘A’.
11. Measure 3/4” directly below
your second mark. Make another
mark and call it ‘B’.
NOTE:
Verify the Lock Length ( as ordered
from the Rustica website) before you
begin drilling!
12. Using an 1/8” drill bit, drill a
pilot hole through mark ‘A’ and
mark ‘B’. Ensure each hole goes
completely through the door. Hold
the drill carefully so the holes are
drilled as straight as possible.
A
B