User manual

36
Trouble Shooting
Problem Cause Solution
No signal on the
playback device
after switching on
the signal source.
Playback device is not switched on. Switch on the playback device.
Connector has fallen out or be-
come loose. Faulty installation.
Check all connections to make sure they are pro-
perly attached. Check the installation.
No video signal
on the playback
device after
switching on the
signal source.
Signal source was not detected by
the playback device.
Select the signal source manually using the remote
control or the channel selection button of the playback
device.
VGA output of the signal source is
not enabled. Faulty installation.
Enable the VGA output. Note the specifications
provided by the manufacturer of the device. Check
the installation.
No audio signal
on the playback
device after
switching on the
signal source.
Volume control on signal source or
on playback device is set too low.
Increase the volume.
Sound on the playback device is
muted. Faulty installation.
Disable the mute function. Note the specifications
provided by the manufacturer of the device. Check
the installation.
Playback device
was not detected.
Connector has fallen out or be-
come loose. Faulty installation.
Check all connections to make sure they are pro-
perly attached. Check the installation.
No data transmis-
sion.
Connector has fallen out or be-
come loose. Faulty installation.
Check all connections to make sure they are pro-
perly attached. Check the installation.