TCR IP 4 Operating Instructions
Overview external push-buttons for manual switching screw terminals for temperature sensor LED link LED activity push-button for manual switching network connection switching outputs to 230 V power supply Figure 1 Scope of delivery TCR IP 4 Operating instructions Accessories (optional) 700 802 610 293 xxx Temperature sensor 700 802 201 Table of contents General ..........................................................................................................................................
General The TCR IP 4 allows the switching of electrical devices via the TCP/IP-network. The device is located in a housing for mounting on a DIN-rail. The TCR IP 4 can be switched from all computers of the same network with their web browser by IP-address 192.168.0.3. A local operation is possible with the built-in or external connected push-buttons. The actual switching state of an output is indicated by a LED located at the pushbutton for switching.
Settings Configuration 1 Figure 3 Increase the access protection of you network connection through an individual user name and password in the field „configuration” (figure 3, 1). Once a password has been chosen, the user name and password will be required to have access to the website. The user remains logged in until the browser will be switched off. Three categories are possible: 1 Neither “administrator name” nor “user name” has been saved: everyone has full access to all functions.
Switching Impulse Mode The outputs can be switched in impulse mode if needed. It will be distinguished between two kinds of impulses. The on-impulse switches on the output for the selected time and the off-impulse switches off the output for the selected time. If the output is already switched on while sending an on-impulse, a window will pop up and display “Impulse time activated!” The impulse duration starts by activating the “impulse switching” button.
Switching Switching of the TCR IP 4 via the internet The TCR IP 4 can be operated from the Internet, if certain preconditions are fulfilled. Every time you login to the Internet, you start a new session and receive from your provider an IPaddress. Through this IP-address your local network or PC can be identified from the internet for the time of the connection to the internet. With each new session you also receive a new IP-address. Permanent connections, i.e.
Technical Data Mechanical characteristics Dimensions L x B x H: Material: Weight: Color: Protection class: 72 x 90 x 65 mm, 4 TE PC 210 g light grey (similar RAL 7035) IP20 according to EN 60529 Temperature range Operation: Storage: -20 to 55 °C -25 to 70 °C Electrical characteristics Power supply: Switching capacity: 100–240 V AC/50–60 Hz max. 230 V AC/50–60 Hz/10 A ohmic load (cosϕ=1) max. 230 V AC/50–60 Hz/7 A inductive load (cosϕ=0.
Niederworth 1–10 58579 Schalksmühle Germany Phone +49 2355 82-0 Fax +49 2355 82-105 © Wilhelm Rutenbeck 2010 · 20201201 · Status 11/04 · Subjected to technical changes www.rutenbeck.de mail@rutenbeck.
