Technical Specifications

Recommended Specifications
Water heater(s) shall be model ____________________,
manufactured by Ruud, having electrical input of __________
kW and a recovery rate of _____________ GPH at a 100°F
temperature rise. Water heater(s) shall have a storage
capacity of 10 gallons. Water heater(s) shall have the UL
seal of certification and be factory equipped with an CSA/
ASME rated temperature and pressure relief valve. Tank(s)
shall have a unique coating of high temperature porcelain
enamel and furnished with magnesium anode rods rigidly
supported. Water heater(s) shall meet or exceed the
efficiency requirements of ASHRAE. Tank(s) shall have a
working pressure rating of 150 psi, and shall be completely
assembled. Water heater(s) shall be approve-listed and
constructed in accordance with UL Sanitation (NSF5). Water
heater(s) shall be equipped with “screw-in” type elements.
Water heater(s) shall be constructed with a SYSTEM
SENTINEL element diagnostic panel utilizing light emitting
diodes. Each LED will correspond to the number and location
of the heating elements and monitor their on-off function.
Water heater(s) shall be provided with internal power circuit
fusing, control circuit fusing, magnetic contactors, 120 volt
control circuit transformer and immersion thermostat(s) with
manual reset high limit control. 1-1/4" inlet and outlet water
connections shall be provided. Water heater(s) shall be
covered by a three year limited warranty against tank leaks.
Ruud Commercial Electric
Booster Water Heaters
4
Ruud Water Heating • 101 Bell Road, Montgomery, Alabama 36117-4305 • www.ruud.com
PRINTED IN U.S.A. 03/15 WP FORM NO. RR102CE-2R Rev. 2
In keeping with its policy of continuous progress and product improvement, Ruud reserves the right to make changes without notice.