Product Overview

Professional Achiever
®
Point-of-Use electric
water heaters feature a space-saving design
for installation in limited spaces
Professional Achiever
Point-of-Use
2.5, 6, 10, 15, 19.9 and
30-Gallon Capacities
120 Volt AC
2-Wire Single Phase
Electric
6, 10, 15, 19.9
and 30-Gallon
2.5-Gallon
Ruud Residential Electric Professional Achiever
Point-of-Use Water Heaters
Ruud Water Heating • 1115 Northmeadow Parkway, Suite 100, Roswell, Georgia 30076 • www.ruud.com
PRINTED IN U.S.A. 12/17 WP FORM NO. PROE RUPOU N Rev. 2
In keeping with its policy of continuous progress and product improvement, Ruud reserves the right to make changes without notice.
Efficiency
• .90 UEF for 30-gallon model
• Single resistored stainless steel
heating element
Features
• High efficiency heating element
•
Over-temperature protector cuts off
power in excess temperature situations
• Automatic thermostat keeps water at
desired temperature
• Wall bracket for easy wall mount
installations and corrosion resistant
1/4 turn drain valve included with
2.5 gallon model
Plus…
• Temperature and pressure relief valve
• Exclusive Ruudglas
®
tank lining resists
corrosion and prolongs tank life
• Meets or exceeds National Appliance
Energy Conservation Act (NAECA)
requirements
• These units are U.L. listed and comply
with Underwriter’s Laboratories
Specifications 174
• Enhanced-flow brass drain valve on
2.5-gallon model
• Low lead compliant
Warranty
• 6-Year limited tank and parts
warranty.*
* See Residential Warranty Certificate for complete
information
Units meet or exceed ANSI requirements and have
been tested according to D.O.E. procedures. Units
meet or exceed the energy efficiency requirements
of NAECA, ASHRAE standard 90, ICC Code and all
state energy efficiency performance criteria.
A
B
WATER CONNECTIONS ALL 1/2" N.P.T.
RELIEF VALVE CONNECTIONS 3/4" N.P.T.
C
DIAMETER
HOT WATER
CONNECTION
COLD WATER
CONNECTION
RELIEF VALVE
CONNECTION
3-1/2"
2-1/2 GALLON MODEL
C
HOT
WATER
OUTLET
COLD
WATER
INLET
RELIEF VALVE
B
E
A D
ANODE
ROD
6, 10, 15, 19.9 AND
30 GALLON MODELS
Uniform Energy Factor and rated gallon capacity based on Department of Energy (DOE) requirements.
*For double element, substitute “2” suffix for “1”. Not available in 120 volt. Available with 2-wire (single phase) outlet only. (6000 watt max.).
• 2.5 gallon model: 1⁄2” N.P.T. inlet and outlet. Relief valve connection 3⁄4”.
Available with 120 or 240 volt AC single phase only, 120v (1440w) 240v (1500w)
Power cord supplied with 120 volt models only.
• 6 through 30 gallon models: 3⁄4” N.P.T. outlet, inlet, anode rod. T & P valve connections. Not available with 3 phase wiring.
Water heaters furnished standard with 120 volt AC, 2000 watt single element.
Special wiring options – a limited number of wiring options are available. Consult factory for price and availability.
CONSTRUCTION DETAILS: The cold water enters the tank a few inches from the bottom. Both hot and cold water lines may be
connected directly to the water heater without special nipples or tees. The relief valve simply screws into the opening provided.
DESCRIPTION
ROUGHING IN DIMENSIONS (SHOWN IN INCHES) ENERGY INFO.
T
Y
P
E
NOMINAL
GALLON
CAPACITY
RATED
GALLON
CAPACITY
MODEL
NUMBER
TANK
HEIGHT
A
HEIGHT TO
HOT WATER
OUTLET
B
DIAMETER
C
HEIGHT
TO SIDE T&P
VALVE
D
HEIGHT TO
COLD WATER
INLET
E
APPROX.
SHIP WT.
(LBS.)
UNIFORM
ENERGY
FACTOR
(UEF)
POU 2.5 – PROE2 1 RU POU 14 14 9-3/4 – – 22 –
POU 6 – PROE6 1 RU POU 15-1/4 12-1/2 15-3/4 11-1/2 4-1/4 36 –
POU 10 – PROE10 1 RU POU 23 20-1/2 15-3/4 19-1/2 4-1/4 46 –
POU 15 – PROE15 1 RU POU 24-1/4 22 17-3/4 21 4-1/2 54 –
POU 19.9 – PROE20 1 RU POU 25-1/4 22-3/4 19-3/4 21-3/4 5 69 –
POU 30 27 PROE30 1 RU95 POU* 31-7/8 23-1/8 22-1/4 23 3 91 0.90