Manual

Figure 8
Figure 7
Figure 9
®
RVF1228ST
www.ruvati.com
Printed in USA
1-855-4-RUVATI
Page 6
®
9. Then screw the remaining female
ends of the supply hoses to the
corresponding hot and cold water
supply valves using an adjustable
wrench or pliers (Figure 8).
10. Tightly screw the faucet head to
the spray hose pipe coming out from
the top of the faucet body (Figure 7).
10. Turn water supply on (Figure 9).
Test the faucet by turning it on and
o. Make sure there is good water
ow and no leaks. Inspect the faucet
above and below the countertop to
make sure there are no leaks. If there
is a leak, turn the water supply o
and contact Ruvati Support.