INSTALLATION GUIDE epiGranite Undermount GRANITE COMPOSITE KITCHEN SINKS ®
epiGranite ® ATTENTION INSTALLER 1. Read these instructions carefully before installation. Inspect sink for damages. 2. Ruvati recommends that installation of sinks be done by a professional installer. 3. Sink edges may be sharp and can cause accidental injury to installer if not careful. Wear cut-resistant protective gloves during installation 4. Templates are only provided as a guide. Place template on sink to ensure the template will give you the proper cutout for the sink.
® epiGranite NOTE: The following instructions are for solid stone countertop (granite, marble or cultured stone) countertops. 1. Place template on countertop. Position it such that the sink will have proper clearance from cabinet. 2. Trace a line around the template. Determine what “reveal” you want your sink to have (see previous page) and based on that, adjust the line accordingly. Cut along the line. 3.
® epiGranite Care and Maintenance • Make a habit of drying your sink after use. This is not necessary, but a good practice, and will ensure that no build up of limescale occurs. Never pour gasoline, acid, alkali, bleach or any solvents in general into or onto the sink because they can interact with the material of the sink and damage it. • Food stains such as wine, coffee, tea, should be removed immediately using warm water and detergent.
