Installation Guide

RUVATI USA
www.ruvati.com
Printed in USA
Page 2
ATTENTION INSTALLER
1.
Read these instructions carefully before installation. Inspect sink for damages.
2.
Ruvati recommends that installation of sinks be done by a professional installer.
3.
Sink edges may be sharp and can cause accidental injury to installer if not
careful. Wear cut-resistant protective gloves during installation
4.
Templates are only provided as a guide. Place template on sink to ensure the
template will give you the proper cutout for the sink. Ruvati is not responsible for
improper sink or countertop installation. Ruvati is not liable for any damages to
sink or countertop or personal injury during installation.
5.
The instructions in this guide are for installation in a
standard granite, marble,
cultured
stone or laminate countertop. For any specialty countertop follow
recommendations of countertop manufacturer or fabricator.
MATERIALS AND TOOLS NEEDED
• Plumber’s Putty
• Sink
• Sink Mounting Clips
• Silicon Caulk
• Philips Head Screwdriver
• Jigsaw or Keyhole Saw
• Pencil
• Sink Cut-Out Template
epiGranite
®
1/4” Overhang
The countertop extends 1/4” over the
edge of the sink on all sides.
INSTALLATION OPTIONS
Ruvati sinks can be installed either with a 1/4” reveal, flush fit, or with a negative reveal (overhang).
1/4” Reveal
The countertop edge sits approximately
1/4” back from the edge of the sink and
exposes the rim of the sink.
Flush Fit
The countertop meets the edge of the
sink, fitting flush w
ith the sink bowl.