Installation Guide

ManualsBrandsRuvati ManualsKitchenRVH7400

RVH7400

RUVATI USA

www.ruvati.com

Features

Dimensions

In the Box

• Cutouttemplate

• Sink

• Mountingandinstallingbrackets

• One(1)basketstrainer(drain)

• Bottomrinsegrid

• 16gaugestainlesssteel

• Premium304gradestainlesssteel

(18/10Chromium/Nickel)

• Luxurioussatinnish-Easytoclean

andlong-lasting

• Heavydutysoundguardpaddingand

undercoating

• Slantedbottomwithelegantdrain

groovesforeasydraining

• Tightradiuscornersforeasycleaning

• Drainplacement-Rear

Undermount Stainlesss Steel

Kitchen Sink Single Bowl

Model

Number Width Length Depth

RVH7400

32” 19”

10”

Rev12/11

PrintedinUSA

Page1

Rinse Grid

Drain C■uer

Basket Strainer

Summary of content (4 pages)

PAGE 1
® RVH7400 Undermount Stainlesss Steel Kitchen Sink Single Bowl Features • • • • • • • 16 gauge stainless steel Premium 304 grade stainless steel (18/10 Chromium/Nickel) Luxurious satin finish - Easy to clean and long-lasting Heavy duty sound guard padding and undercoating Slanted bottom with elegant drain grooves for easy draining Tight radius corners for easy cleaning Drain placement - Rear In the Box • • • • • Cut out template Sink Mounting and installing brackets One (1) basket strainer (drain) Bott
PAGE 2
® RVH7400 Attention Installer 1. Read these instructions carefully before installation. Inspect sink for damages. Do not install if the sink is damaged. 2. Ruvati recommends that installation of undermount sinks be done by a professional installer. 3. Templates are only provided as a guide. Place template on sink to ensure the template will give you the proper cutout for the sink. Ruvati is not responsible for improper sink or countertop installation.
PAGE 3
® RVH7400 Installation NOTE: The following instructions are for wood countertops. For granite, marble or solid stone countertops, ask your fabricator for installation instructions. 1. Place template on countertop. Position it such that the sink will have proper clearance from cabinet. 2. Trace a line around the template. Determine what “reveal” you want your sink to have (see previous page) and based on that, adjust the line accordingly. Cut along the line. 3.
PAGE 4
® RVH7400 Care and Maintenance • Clean regularly with normal detergent and warm water. • Always make a habit of drying your sink after use and buffing with a soft cloth. This will ensure that no build up of limescale or other mineral deposits can occur. • Clean the sink once a week using a nonabrasive cleanser such as Comet and a clean soft sponge. Scrub in the same direction as the natural grain of the sink. • Never let soap or other household cleaners to dry on the surface of the sink.