Installation Guide

ManualsBrandsRuvati ManualsPlumbingKitchen Sink

RUVATI USA

www.ruvati.com

Features

Dimensions

• 16 gauge stainless steel

• Premium 304 grade stainless steel (18/10

Chromium/Nickel)

• Sandblasted to create Matte PVD

nish: Easy to clean, long-lasting

and resists ngerprints

• Heavy duty sound guard padding and

undercoating

• Slanted bottom with elegant drain grooves

for easy draining

•

Curved inside corners for easy cleaning

• Drain placement - Rear

RVH9742

Rev 7/16

Printed in USA

Page 1

Color Options:

Black Stainless Steel

Copper Tone Stainless

Matte Gold Brass Tone

Optional Accessory

(available in matching finish):

NOT INCLUDED. MUST BE

PURCHASED SEPARATELY

RVA1041 Garbage Disposal Flange

In the Box

• Sink, Rinse Grid (qty 2), Strainer Drain Assembly (qty 2)

Model

Number Width Length Depth

RVH9742 33” 22” 9”

Color Stainless Steel Apron-Front

Farmhouse Kitchen Sink

Summary of content (4 pages)

PAGE 1
® RVH9742 Color Stainless Steel Apron-Front Farmhouse Kitchen Sink Features • • • • • • • 16 gauge stainless steel Premium 304 grade stainless steel (18/10 Chromium/Nickel) Sandblasted to create Matte PVD finish: Easy to clean, long-lasting and resists fingerprints Heavy duty sound guard padding and undercoating Slanted bottom with elegant drain grooves for easy draining Curved inside corners for easy cleaning Drain placement - Rear In the Box • Sink, Rinse Grid (qty 2), Strainer Drain Assembly (qty
PAGE 2
® RVH9742 Attention Installer 1. Read these instructions carefully before installation. Inspect sink for damages. Do not install if the sink is damaged. 2. Ruvati recommends that installation of apron / farmhouse sinks be done by a professional installer. 3. Ruvati is not responsible for improper sink or countertop installation. Ruvati is not liable for any damages to sink or countertop or personal injury during installation. 4.
PAGE 3
® RVH9742 Installation 1. Measure sink apron and cabinet opening to make sure sink apron will ft into cabinet opening. If necessary, sand opening or add wood fller strips. 2. Prepare the cabinet and create a support frame inside the cabinet that the sink will sit on. Use 2x4 solid wood studs to create the support frame. Your cabinet and support frame should be strong enough to hold up to 200 lbs of weight once installed.
PAGE 4
® RVH9742 Care and Maintenance • Clean regularly with normal detergent and warm water. • Always make a habit of drying your sink after use and buffing with a soft cloth. This will ensure that no build up of limescale or other mineral deposits can occur. • Clean the sink once a week using a nonabrasive cleanser such as Comet and a clean soft sponge. Scrub in the same direction as the natural grain of the sink. • Never let soap or other household cleaners to dry on the surface of the sink.