User's Manual
Table Of Contents
- QUICK SETUP GUIDE
- Glossary
- Preface
- Step 1 : Overview of the equipment
- Step 2 : Connecting the OnAir Set Back Box.
- Step 3 : Preparation
- Step 4 : Pairing the Remote Control Unit
- Step 5 : Network - which connection?
- Step 6 : The Wi-Fi bubble
- Advanced Features
- Manual Setup - Remote Control Unit
- Troubleshooting
mandatory apart for DNS 2, which is optional.
The above screen shot displays the input template for the IP details, all the fields are
mandatory except for DNS 2, which is optional.
Manual IP configuration is now complete, skip the next section and continue with
Connectivity check on page 17.
Automatic:
If a VDA Appliance Server is available on the network only ‘Common Data’ must be entered
manually other parameters are provided automatically by the Appliance Server. If a generic
DHCP server (i.e. home router) is used then ‘Common Data’ and the ‘Hotel Code’ must be
entered manually
4
.
Standard DHCP discovery protocol is used to implement this feature and it will detect (based
on the incoming reply) if there is missing data that must be entered manually.
The screen shot below, shows the input template when Automatic is selected.
When all the fields are completed, select next and click to proceed to next step.
4 OnAir Appliance Server has to be installed, configured and made available on the same
network as the OnAir SBB before starting the installation of OnAir SBBs with Automatic
configuration, or the Automatic procedure will fail. The ‘Hotel Code’ information is only
available from the OnAir Appliance Server, when using generic DHCP servers the Hotel
Code has to be entered manually.
15