User's Manual
Table Of Contents
- QUICK SETUP GUIDE
- Glossary
- Preface
- Step 1 : Overview of the equipment
- Step 2 : Connecting the OnAir Set Back Box.
- Step 3 : Preparation
- Step 4 : Pairing the Remote Control Unit
- Step 5 : Network - which connection?
- Step 6 : The Wi-Fi bubble
- Advanced Features
- Manual Setup - Remote Control Unit
- Troubleshooting
The SBB will send a network enquiry to retrieve setup information from the Appliance Server.
In case of failure an appropriate message will be displayed on the screen.
The following screen shot shows the warning message generated when using a generic DHCP
server, the 'Hotel Code' must be entered manually.
The combination of ‘Hotel Code and 'Common Data', uniquely identifies the SBB with in the
hotel/property. Please take care when entering the 14 digit ‘Hotel Code’ as entering an
incorrect code will result in the failure of the following connectivity test.
When completed select next and click to proceed with next step: 'connectivity check'
When completed select next and click to proceed with next step: 'connectivity check'.
16