User's Manual

Step 6 : The Wi-Fi bubble
Access point Setup
OnAir SBB has an internal Wi-Fi b/g/n/ card that can be used to provide a local Wi-Fi AP (Access
Point) in the room. Tablets, phones, notebooks, or any other Wi-Fi enabled device, can get
connectivity via the OnAir SBB. The corresponding SSID and WPA2 key are only available from
a menu page on the television connected to the SBB.
Please note this option is only available when the SBB is configured ‘Wired’ internet
connection.
This feature can be enabled or disabled as required. If enabled for use select the country
where you are installing the SBB
6
, and the Wi-Fi area coverage you require, low, medium or
high. These are estimated coverage and are influenced by many factors, such as walls, objects
and distance. This parameter has to be ‘tuned’ and tested on a case by case basis.
The SSID cannot be manually configured, it is generated automatically by an algorithm in SBB
to avoid confusion with adjacent SBBs. Authentication is fixed to WPA2 and is also generated
automatically by an algorithm in SBB , both the SSID and WPA2 are displayed for information
only.
Select next and press to display a summary of the configured local access point.
6 Set as needed to indicate country in which device is operating to set regulatory domain.
This can limit available channels and transmit power.
20