User's Manual
Table Of Contents
- QUICK SETUP GUIDE
- Glossary
- Preface
- Step 1 : Overview of the equipment
- Step 2 : Connecting the OnAir Set Back Box.
- Step 3 : Preparation
- Step 4 : Pairing the Remote Control Unit
- Step 5 : Network - which connection?
- Step 6 : The Wi-Fi bubble
- Advanced Features
- Manual Setup - Remote Control Unit
- Troubleshooting
Advanced Features
Several additional features are available once the initial setup procedure has been completed.
To access to these features a specific code must be sent to the SBB using the paired RCU. Entry
of the correct code forces the television to display the ‘Configuration Options’ menu below
8
.
“Network” and “Access Point” are already described on pages 12-18 being part of the initial
setup procedure. The following gives a brief description of the additional features and
additional setup procedures available for complex installation scenario or for maintenance
purposes.
Detailed information of these additional features and procedures is available in the OnAir-
Setup Guide document available from: - http://www.powertvonair/manuals/OnAir-
Setup_Guide.pdf
Configuration options: Remote Control
Allow additional RF4CE input devices (like remote controls or keyboards) to be paired with the
SBB.
Configuration options: Reboot
Forces a soft reboot of the SBB, the only way to exit the setup menu.
Configuration options: System Info
Displays details of the SBBs current setup and configuration, including firmware version and
network settings.
8 See the Troubleshooting chapter below for the key sequence to access the setup menu.
22