User's Manual

Advanced: IR Configuration
The RCU (Remote Control Unit) is a dual technology device, using both RF4CE and IR
transmission, RCU buttons are grouped by function and each group can be assigned to use
one of the two transmission methods.
The RF4CE and IR settings of the first RCU / SBB of a new installation must be discovered and
configured manually, however if a VDA Appliance Server is part of the installation then the
remaining RCUs can be configured automatically by repeating the ‘paring’ procedure. Please
note without an Appliance Server all RCUs must be configured manually.
Once the optimal RCU settings are established for the installation, it is strongly recommended
the Appliance Server is configured to automatically manage the RCU settings.
(Refer to 'Manual Setup - Remote Control Unit' on page 28 and 'Appliance Server Setup Guide'
document available from : -
http://www.powertvonair/manuals/OnAir-Appliance_Server_Setup_Guide.pdf
Advanced: CEC Test
It is important to establish how well the CEC protocol has been implemented in the television
in order to define the best control configuration possible.
A guided test will rank the TV’s performance and will be used to define the final OnAir remote
control configuration.
Each test is launched by selecting an item in the 'Main Command' column and pressing ,
the result of the test is registered by selecting the appropriate button under the “Did it Work”
column.
24