User's Manual
Table Of Contents
- QUICK SETUP GUIDE
- Glossary
- Preface
- Step 1 : Overview of the equipment
- Step 2 : Connecting the OnAir Set Back Box.
- Step 3 : Preparation
- Step 4 : Pairing the Remote Control Unit
- Step 5 : Network - which connection?
- Step 6 : The Wi-Fi bubble
- Advanced Features
- Manual Setup - Remote Control Unit
- Troubleshooting
Step 2 : Connecting the OnAir Set Back Box.
8
Using the supplied HDMI cable, connect the SBB
to the television.
If you are using wired networking connect the
supplied CAT5 patch cord to the RJ45 connector
labelled “WAN” on the OnAir SBB and to your
network socket.
Connect the 12 volt DC power pack output lead
to the input marked 12VDC on the OnAir box,
(12 volt power pack included in the OnAir kit).
Connect mains power cord to the power outlet.