User Guide

copyright 2017 ruwido austria gmbh - this document is the intellectual property of ruwido austria gmbh and contains confidential information.
reproduction, modification, communication to third parties and any other use is strictly prohibited without prior written accordance of ruwido.
Telus_hospitality BLE_2759-515_remote_control_user_guide_v2 page 10 of 14
1.7 notes
- in case of low battery (<2.2V) the red LED flashes three times after sending a
command
- TV programming will remain if batteries are being removed / changed
- if STB commands are transmitted via bluetooth, the LED will flash green
- if STB commands are transmitted via infrared, the LED will flash red
- for TV commands the LED will flash red (only if TV has been programmed)
- for AMP commands the LED will flash yellow (only if AMP has been programmed)
- dongle can be paired with only one remote control at the time
- if dongle is out of power it cannot be powered on with remote control
- in case remote control has been programmed for tv and dongle is out of power, the tv
and amplifier still can be operated (power on/off, volume +/-, mute)
- sections 1.2, 1.3, 1.4 and 1.5 do not apply if BLE remote control is being
used without BLE2IR dongle.
- in that case TV / AMP programming online TV database tool (pf app, etc.)
needs to be used