User Guide
copyright 2017 ruwido austria gmbh - this document is the intellectual property of ruwido austria gmbh and contains confidential information.
reproduction, modification, communication to third parties and any other use is strictly prohibited without prior written accordance of ruwido.
Telus_hospitality BLE_2759-515_remote_control_user_guide_v2 page 8 of 14
1.3 programming your amplifier
before you start to program your remote control, make sure your TV is switched off and
Amplifier is switched on.
to speed up your programming process, the most used Amplifier brands have short
numbers that will be used in the programming process.
in case your amplifier brand is not listed please use code 0 0 7 9 to search for all brands.
please note that the search can take up to 15 minutes in that case.
0060
Sony
0068
Pioneer
0061
Yamaha
0069
Philips
0062
Harman/Kardon
0070
Aiwa
0063
Denon
0071
Hitachi
0064
Samsung
0072
Sharp
0065
LG
0073
Sanyo
0066
Onkyo
0074
Panasonic
0067
Bose
0079
All others
tab. 2: amplifier brand list - top brands
process:
1. press and hold options key for 3 seconds, until the LED flashes twice green
2. enter the 4-digit code for the brand of your amplifier (see brand list above) within 10
seconds
the LED flashes green twice
3. press and hold the power button until your Amplifier switches off
4. as soon as your amplifier switches off, remove your finger from the power button and
press OK button to confirm.
the LED flashes yellow twice
5. press the power button to switch on your amplifier and TV
in case an invalid code has been entered the LED will be on for 2 seconds.
if no key code is being entered within 10 seconds the remote will time out and the
programming procedure needs to be started again.