Installation and Operation Manual
Table Of Contents
- 1 Introduction
- 2 General safety regulations
- 3 Warranty
- 4 Assembly of the fireplace
- 4.1 Removal of covers
- 4.2 Rear screen assembly
- 4.3 Top screen assembly
- 4.4 Installing the fireplace
- 4.5 Placing design bottom plates
- 4.6 Placing lower sidewalls
- 4.7 Log set installation
- 4.8 Placing glass reflector
- 4.9 Placing upper side walls
- 4.10 Placing front window
- 4.11 Connecting fireplace to power
- 4.12 Bluetooth pairing E-one remote
- 5 Installing the fireplace
- 6 E-one operation, design your own experience
- 7 Maintenance
- 8 Technical data
10
4.8 Placing glass reflector
The glass reflector is susceptible to stains and fingerprints.
For this reason, always use the supplied gloves for
installation.
To clean the glass reflector, follow the cleaning instructions
provided in chapter 7.
4.9 Placing upper side walls
4.10 Placing front window
When placing the front window, make sure the
front window is parallel to the frame of the
fireplace.