RV Media Outdoor Bluetooth Speaker & RGB LED Light, Black : Product Manual : Page 4

TROUBLESHOOTING

Most connection problems can be fixed by manually disconnecting and reconnecting

your Bluetooth device to the RV RGB Media Bluetooth Speaker Light.

Connection Security

While this device does not need a PIN code to allow devices to connect to it, your

connection is secure and cannot be disturbed by someone nearby with a Bluetooth

device.

Once you have turned on the Bluetooth Speaker and connected your Bluetooth

device, the speaker ceases being in “discovery” mode and will not be visible to other

Bluetooth devices ensuring your Bluetooth connection with the speaker is secure.

If while using the speaker, you want to connect a different device to it, it is suggested

you use the following procedure:

a) Turn off the speaker.

b) Turn off Bluetooth on the device that had been connected to the speaker.

c) Turn on the speaker and connect the new device to it.

Note. The reason you need to turn off Bluetooth on the original device is that the

speaker may connect to it first (when turned back on) rather than the new device.

Once the new device is connected, you can turn on Bluetooth again on the original

device.

This system ensures you have a secure connection between your device(s) and the

speaker that cannot be interrupted by other nearby Bluetooth devices.

CLEANING

While the RV Media Bluetooth Speaker Light is fully waterproof, it is recommended

that when cleaning your RV with a pressure washer or high pressure hose that it be

covered with a plastic bag or similar and taped to the edge of the speaker.

NOTES

______________________________________________________________

_____________________________________________________________

______________________________________________________________

Page 6

Page 7