Specifications

ELECTRICAL
78
Isolated Stud
3/8" - 16 UNC thread.
086233-01-000 Isolated
Stud
MagneTek Converter
MagneTek’s 7400 Series of solid state converters
provides ultra-clean DC power, enabling electrical
systems to meet the sophisticated requirements of
today. The well-filtered power is free from “spikes” or
“surges” which can hinder electrical systems and
accessories. The whisper quiet operation is a vast
improvement in comparison to the humming noise
traditionally associated with converters. MagneTek
solid state converters also serve as fully regulated
two-step battery chargers. The 7400 Series provides
all of this while weighing just 7.5 pounds! 4-1/8"H x
7"W x 12-3/8"L.
123058-01-000 Converter-55 AMP, Electronic
7455BT
123058-02-000 Converter-45 AMP, Electronic 7445
Dimensions 130 Watt
Inverter
The Dimensions Inverter converts 12 volt DC
current from the vehicles electrical system to 117-
volt, 60 HZ power. The inverter has voltage and
frequency regulation, together with a controlled
quasi-sine wave-form, to allow operation of all
equipment within the inverters’ power rating. High
technology control protection assures long life and
no user headaches such as blown fuses or failed
transistors. U.L. Listed. Size: 10" x 5.2" x 3". Weight:
5.2 lbs.
099048-03-000 Inverter 130 Watt, DUI-12/130TL
Dimensions 600 Watt
Inverter
This inverter converts 12 VDC from batteries to
usable 120 VAC, 60 HZ power. The inverter was
built using filter capacitors, a transformer and
metal oxide silicon field effect transistors (MOSFET)
in addition the inverter has a digital system
processor (DSP) to control the output voltage and
frequency as the DC input voltage and/or output
load varies. The signal output waveform shape of
this inverter is not sinusoidal; it has a total
harmonic distortion of 31% and a maximum single
harmonic distortion of 25%. 14-1/2”L x 7”W x 4-
1/2”H. 13 lbs.
154511-01-000 Inverter-600 Watt w/o Remote
Panel
154511-02-000 Remote/Panel, Inverter/600 Watt
Inverter/Charger
The Dimensions standby power system incorporates
a patented construction method ensuring that you
are buying the most durable inverter on the market.
The patented cooling will provide years of trouble
free use in even the harshest environment. The built
in battery charger utilizes back-to-back SCR’s
(silicon controlled rectifiers) for reliability and less
noise interference. The charger performs battery
conditioning completely automatically. Our fail-safe
shore power transfer relay design allows shore power
to pass through the relay to the external outlets if
the inverter should ever fail.
148254-01-000 Inverter/Charger, 2000W
148254-03-000 Cable Asm.-Inverter-w/8 Pin
Modular Phone Jack-50’
148254-04-000 Cable Asm.-Temperature, Battery
148254-01-700 Remote Panel-Inverter/Charge
Inverter/Charger
148254-05-000 Remote/Panel,
Inverter/Charger
Intellitec’s Energy
Management System
127002-10-000 Panel-Monitor, Energy Management
Systems Control w/3 Plug
127002-11-000 Module-EMS Center w/Remote
Sensor
127002-10-700 Wire Asm./Monitor Adapter-4 Pin
Mini to 3 Pin Monitor
127002-11-700 Wire Asm./Module Adapter-4 Pin
Mini to 3 Pin Module
127002-11-701 3-Pin Plug
127002-11-702 4-Pin Plug
Dimensions 300 Watt
Inverter
The Dimensions 300 Watt Inverter features
automatic electronic short circuit/overload
protection, automatic over temperature shutdown
and output circuit breaker. Automatic 10W battery
shutdown, quasi-sine wave form, 60HZ power. 13" x
6.25" x 3.25".
099048-04-000 Inverter-300 Watt DUI/300T
Automatic Transfer Switch
The Parallax Model ATS 5070 provides automatic
switching of power from shoreline to generator,
simply by starting the generator. ATS 5070 also
features many new innovations, including
components designed for simple field service. UL
listed Quality components ensure safe, smooth
power transfer performance.
106071-06-000 Switch-Automatic Transfer
ATS 301
ATS
TM
301 line generator switch makes power
transfer more convenient and reliable than ever. ATS
301 can be mounted anywhere and hook-up is
simple through the use of terminals rather than wire
nuts. The compart size of 6” x 4-1/8” x 4-7/16” fits
in with any floor plan or cut-out area. Weighs only
3.5 pounds.
165598-01-000 Switch Automatic Transfer, ATS 301