User`s manual

INSTALLERUSERTECHNICIAN

2424

3.10 Casing removal.

To facilitate boiler maintenance the casing can be

completely removed as follows:

- remove the plastic lower protection grid;

- undo the screws (1) on the bottom of the casing

front;

- pull the bottom of the casing front outwards,

pushing upwards (see figure);

- undo the screws (2) on the top of the casing front

support sheet (see figure);

- undo the screws (3) on the bottom side of the boiler

then push upwards a little in order to free the side.