Installation Guide
Table Of Contents
- Introduction
- Installation Process
- Preparing for Installation
- Mounting the ECU
- Routing Power, Signals, and Buttons
- Placing Cameras
- Putting the Components Together
- Connecting to the Power Source
- Connecting Cameras to the ECU
- Connecting Monitors and Recorders
- Connecting the ECU to a Standalone (Single) Monitor
- Connecting the ECU to a Monitor and a Second Device via the CVBS Connector
- Connecting the ECU to a HD Monitor (via VGA) and a Recorder (via CVBS)
- Connecting the ECU to Up to Three Devices
- Connecting the Push Buttons
- Connecting Antennas and an IR Receiver
- Connecting to Vehicle Signals via the View Select Signal Cable Harness
- Next Steps...
- inView 360 HD Customer Support
© Rear View Safety | All rights reserved
p. 5
1 x Cable Harness
1 x ECU w/Lock-Removable Front Cover
4 x Camera Cable Extensions
In 3 different lengths:
• 8m front
• 12m left, right
• 15m back
(Extra cable extensions can be ordered separately.)
1 x External IR Sensor Receiver 1 x Driver Button Cable Harness
1 x Remote Control
1 x View Select Signal Cable Harness
Power Lines