User Manual
13
Reverse With Confidence
™
Monitor Operation
POWER
ON / OFF
MENU/
SELECTION
BUTTON
CAMERA
SELECTION
“-”
DOWN
“+”
UP
ROTATE
IMAGE
(Back/Exit
when in Menu
Mode)
• To turn on the monitor, press “POWER” button
• To get to the menu, press “MENU” and use arrows to choose your settings
• To display options press “MENU”
• To adjust brightness, press “MENU”. Use arrows to choose desired camera and press
“MENU” to select. Once selected, use arrows to set the brightness
• To adjust contrast press “MENU”. Use arrows to choose desired camera and press
“MENU” to select. Once selected, use arrows to set the brightness
• To adjust saturation press “MENU”. Use arrows to choose desired camera and press
“MENU” to select. Once selected, use arrows to set the brightness
• To set distance grid lines press “MENU” to select. Once selected, use arrows to
choose off or on and press “MENU”
• To set auto power press “MENU” to select. Once selected, use arrows to choose off or
on and press “MENU”.
• To reset press “MENU” to select. Once selected, use arrows to choose yes or no and
press “MENU”.
• To return to previous press “REV” when in menu
• To rotate screen press “REV”
• To adjust the volume press “UP” and “DOWN” buttons
• To toggle between cameras/display modes press "V1/V2" Choose from Single/Dual/
Triple/Quad/H Mode/POP