Manual

- 38 -
1.4.4.1 TEMPERATURE SETTINGS
The 1.4.4.1TEMPERATURE SETUP screen allows the User to trigger the MDVRs Recording Mode based
on low and high temperature thresholds determined by temperature settings entered. Either or both High and
Low settings may be entered independently.
DEVICE
Select the Sensor used as the temperature reporting source:
MDVR/DISK MDVR internal temperature (Standard)
TEMP EXT (1 4 ) External temperature sensors, up to 4 (Optional)
NAME
Enter a unique name for each temperature reporting source
UNIT
Select the unit of temperature measurement:
F Fahrenheit
C Celsius
RANGE
(NAME)
There are two settings (each optional) to create the upper and lower temperature range:
LOW(L-TEMP) Low temperature setting row
HIGH(H-TEMP) High temperature setting row
ENABLE
Select the operational status of this function:
ON The selected functions are ‘On’
OFF The selected functions are ‘Off’
TRIGGER(T
HRESHOLD)
Enter the Temperature limits and select + or indicators as needed:
LOW The Low temperature to trigger a response
HIGH The high temperature to trigger a response
TYPE
Select one of two options:
ALARM Event will be, recorded, logged and searchable as an ALARM
EVENT Event will be, recorded, logged and searchable as SYSTEM
Action Bar Keys (Select, then press ENTER):
SAVE
To save and activate the new settings
SETUP MENU
1.4 'ALARM'
SETUP MENU
1.4 'ALARM'
ALARM 1.4.1
'TEMPERATURE'
ALARM 1.4.1
'TEMPERATURE'
TEMPERATURE
1.4.4.1
TEMPERATURE
1.4.4.1
Mobilemule™