Instruction Manual

Rear View Safety
6
Cable Connection Diagram
Sensor input connections distance:
Power harness cable length : 48 ft.
Sensors “1” and “2” : 25 ft.
Sensors “3” and “4” : 13 ft.
Installation Overview
1) Drill four holes for the four (4) waterproof sensors at equal
distance in the rear bumper:
21.5 mm when not using grommet
25.00 mm when using grommet
2) Mount sensors using the included grommets (Optional)
3) Connect the sensors to the Sensor Harness Cable
4) Connect Sensor Harness Cable to Control Module
5) Connect LED Display to Power Harness Cable
6) Connect Power Harness to the LED Display
7) Connect Power Harness to Power Source
CABLE CONNECTION