Instruction Manual

REAR VIEW SAFETY
10
Auto Pairing
Auto Pairing:
1. Connect camera you are pairing to power.
2. Use the "CAM" button to select the channel you want
to pair to.
3. Press "MENU" to open the menu and press "MENU"
again to initiate "pairing mode". You will see the system
start counting down from 50 seconds. Once "pairing
mode" is active it will last for 50 seconds.
4. The system should pair automatically.
5. Unplug paired camera from power before pairing a 2nd
camera.
NOTE: Please make sure the camera is receiving power
when you pair.
REAR VIEW SAFETY
10