User Manual

RVS-350P Video Output
The RVS-350P has an aviation video socket, which can output NTSC video signal (We can also
customize PAL signal)
4 pin aviation video socket
 The RVS-350P power input range is 9V-32V. It works with both 12V and 24V power
 Driver Fatigue Monitor System has a low power consumption. Using 12V, the average
current is less than 100mA. Using 24V, the average current is about 60mA.
Power Supply
RVS-330P
CableConnection：
8P Cable Alarm Signal
Interface
5P cable color
Pin number Definition of signal
Red pin-1
Power+，DC12V/DC24V
Black pin-2
Power-，GND
Yellow pin-3
Signal output of "fatigue warning"
When fatigue detector alarming, output low level(0V);
When alarm stopped, output high level(4.2V)
Blue pin-4 Signal output of "no portrait warning"
When portrait not detected, output low level(0V);
When portrait detected, output high level(4.2V)
Green pin-5 Signal input of” pause monitor”
When input High-impedance, detecting and alarming normally;
When input GND, suspending alarming (until the signal resume
high impedance after 30s );
4P cable color Pin number Definition of signal
Red pin-1
Power+，DC12V/DC24V
White
pin-2
Power-，GND
Grey
pin-3
RVS-330 Data Receiver (Rxd)
Brown
pin-4
RVS-330P Data Transmission (Txd)